Distinctive Timber Building Kits Inc.

We supply the frame with panels to cover the entire structure.

Specification sheet of materials supplied with your building kit.

Distinctive Timber Building Kits Inc.

Frame
-
Your frame will be precut and predrilled from dressed four sides hemlock.
-->CLICK HERE FOR FRAMING EXAMPLE
Sill
-
4" x 6" precut and mitered.
Posts
-
4ft. on centre 6" X 6" cut to length for walls.
Gable Ends
-
4" x 6" pre-sloped 4' on centre.
Ring Beam
-
6" X 6" or larger with mitered corners.
Loft Frame
-
6" X 6" or larger 4' on centre with 6" x 8" centre carrying beam and mitered blocks to support joists.
Rafters
-
6" X 6" or larger pre-notched sloped 4" - 0" on centre.
Collar Ties
-
6" X 6" pre-drilled.
Bracing
-
24 knee braces minimum, 3' long with 45 degree cuts pre-drilled.
Cedar Wall Panels
-
Textured or smooth V-Joint. All panels are produced in a jig using corrosion resistant zinc plated screws to secure 1" X 4" cleats on the back side of panel.
Gable End Panels
-
Pre-sloped.
Roof Panels
-
Dressed 1" V-matched kiln dried Eastern White Pine. 4' X 8' panels and 4' x 4' panels produced in a jig with battens 2' on center plus diagonals. 5' panels to create 1' overhang.
Fastenings
-
We now provide all necessary OlyLog Fasteners for kit frame.
Optional
-
Second Panel to be the finish on the inside of the exterior walls.
Windows and doors available.

The Components
(click the image to enlarge)

Distinctive Timber Building Kits Inc.